Used for springs, saws, clutch plates and valves etc. CS100 can be cut by laser, waterjet etc. It is generally used where higher hardness's and wear resistance is required or where a higher strength is required in lower thickness material. Common equivalents are CS95, 1095, C100S, XC90
CS100 is normally supplied in the hardened and tempered condition.
At BSS we have stock in sheets of 300mm x 1000mm in thicknesses of 0.10mm, 0.20mm, 0.25mm, 0.50mm and 1.00mm available for next day delivery. Other sizes are available for delivery within a few days.
| Carbon | Silicon | Manganese | Sulphur | Phosphorus |
| 0.95/1.05% | 0.05/0.35% | 0.30/0.60% | 0.025% max | 0.025% max |
Contact BSS on 01709 530591 email bss@steelstrip.co.uk
No comments:
Post a Comment